This listing is no longer available.

Dirt Bike!! Jet Skis!! ATV!! UTV!! 2 or 4 stroke!

N/A
Colby, Kansas
Posted 4 years, 11 months ago
Expires in 0 minutes
2,765 Clicks

Description

C&P Link below to order AMSOIL directly!! Many Thanks!!

http://www.syntheticsofcolby.myamsoil.com/

10W-40 Synthetic Dirt Bike Oil

Designed to improve the performance of bike and rider.

 

Engineered to deliver the performance attributes most requested by on- and off-track dirt bike riders, including consistent clutch feel. Consistent clutch feel is the result of “friction durability,” so whether deep into a race or deep in the woods, riders can feel confident their clutch will perform from start to finish. AMSOIL-exclusive advanced chemistry provides outstanding engine reliability for worry-free operation under severe conditions.

DOMINATOR® Synthetic 2-Stroke Racing Oil

 

 

Racers can’t win what they don’t finish. That’s why AMSOIL formulators built DOMINATOR® 2-Stroke Racing Oil. This complex blend of oils and additives directly addresses the heat, pressure and friction of race-engineered engines. These engines operate on the edge, yet engine reliability is critical. DOMINATOR does an outstanding job protecting high-performance engines. It adds durability that professional racing teams depend on and delivers confidence so engines can be pushed to the limit.

NTERCEPTOR® Synthetic 2-Stroke Oil

A specialized oil for today’s specialized engines

 

High-performance 2-stroke oil with an emphasis on exhaust power valves. Contains high levels of detergent additives to prevent valve sticking. Replaces manufacturer-branded oils. Injector use or 50:1 premix. Excellent in snowmobiles, motorcycles, PWC, ATVs and jet boats.

0W-40 Four Stroke oil in Stock!!

Perfect for ALL of your  ATV and UTV Machines!

AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil is specially formulated for ATVs, UTVs, snowmobiles and other powersports applications. Its broad viscosity range and wax-free formulation make it excellent for use in both hot and cold temperature extremes. As an SAE 40-weight motor oil, AMSOIL Formula 4-Stroke Power Sports Oil provides outstanding protection for hot-operating engines, while its 0W rating and -60°F pour point ensure easy cranking, excellent cold-weather starting and quick post-startup protection. Formula 4-Stroke Power Sports Oil is an extreme-temperature lubricant that provides outstanding performance in high-performance, recreational or work/utility engines.

Resists Heat and Thermal Breakdown
AMSOIL engineered Formula 4-Stroke Power Sports Synthetic Motor Oil to withstand the high temperatures of recreational engines. It effectively resists oxidation and oil vaporization to help prevent carbon/varnish formation, control oil consumption and minimize exhaust emissions. It also controls oil thickening, promoting improved fuel economy, and it helps keep engines clean for peak operating efficiency.

Excellent For Transmissions
AMSOIL Formula 4-Stroke Power Sports Oil is wet-clutch compatible and contains no friction modifiers, making it ideal for both two- and four-stroke ATV transmissions. The friction-modifier-free formulation is designed to prevent clutch slippage, helping deliver maximum torque and power to the wheels – a critical feature for towing or high-horsepower engines. It meets the frictional requirements of JASO MA/MA2 and ISO-L-EMA2.

Superior Wear Protection
AMSOIL Formula 4-Stroke Power Sports Oil is formulated with high levels of anti-wear additives that provide excellent protection for pistons, bearings and gears in transmission-containing units. Its shear-stable, SAE 40 viscosity delivers a thick lubricating film for an extra margin of protection in hard-working engines.

Anti-Foam
Churning occurs in high-rpm engines that can cause oil to foam, depleting its lubricating abilities and increasing heat and wear. AMSOIL Formula 4-Stroke Power Sports Oil controls foam, promoting cooler engine operation and reduced wear.

Special Additives
AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil contains robust dispersant/detergent additives that effectively neutralize the high levels of acids and combustion by-products prone to small engines. It is anti-rust fortified for superior rust prevention, which is especially important in seasonally or infrequently used powersports equipment.

APPLICATIONS AND RECOMMENDATIONS
AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil is recommended for four-stroke engines. It is also recommended for transmissions in two- or four-stroke applications. It is an all-climate/all-season oil that replaces 0W-30, 0W-40, 5W-30, 10W-30 and 10W-40 oils for ATVs, UTVs, snowmobiles and other powersports equipment. Also recommended as a replacement for Polaris Synthetic PS-4 Plus and Arctic Cat Synthetic ACX. Manufacturers include Polaris®, Honda®, Yamaha®, Ski-Doo®, Can-Am® (Bombardier®), Suzuki®, Kawasaki® and Arctic Cat®.

  • API SL/CF, SJ, SH, SG
  • JASO MA/MA2
  • ISO-L-EMA2

COMPATIBILITY
AMSOIL Formula 4-Stroke Power Sports Synthetic Motor Oil is compatible with conventional and synthetic motor oils. Mixing AMSOIL motor oils with other oils, however, will shorten the oil's life expectancy and reduce its performance benefits. AMSOIL does not support extended drain intervals where oils have been mixed.

Aftermarket oil additives are not recommended for use with AMSOIL motor oils.

SERVICE LIFE
Follow the equipment manufacturer's recommended drain intervals.

AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available via the Internet at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute. Return used oil to collection centers.

TYPICAL TECHNICAL PROPERTIES

AMSOIL FORMULA 4-STROKE® POWER SPORTS SYNTHETIC MOTOR OIL SAE 0W-40 (AFF)

Kinematic Viscosity @ 100°C, cSt (ASTM D-445)

14.7

Kinematic Viscosity @ 40°C, cSt (ASTM D-445)

83.7

Viscosity Index (ASTM D-2270)

184

CCS Viscosity, cP @ (-35°C) (ASTM D-5293)

6139

Flash Point °C (°F) (ASTM D-92)

226 (439)

Pour Point °C (°F) (ASTM D-97)

-51 (-60)

Noack Volatility, % weight loss (g/100g) (ASTM D-5800)

7.3%

Four Ball Wear Test
(ASTM D-4172B: 40 kg, 75°C, 1200 rpm, 1 hour), Scar, mm

0.35

Total Base Number

10.5

Larry Jumper Pnone # Seven Eight Five-443-Two Five Five Nine

Help Chat